• Shop In Store
    2/23-25 Swift Way, Dandenong South, Victoria,
    8am-6pm Mon-Fri
    9am-2pm Saturdays

  • Need Help?

    (03) 9123 1226

  • Shop In Store
    2/23-25 Swift Way, Dandenong South, Victoria,
    8am-6pm Mon-Fri
    9am-2pm Saturdays

Bulky Item
Add to Cart To Get a Personalised Freight Quote

3000mm 3.0×1.3-1.5m Double Swing Driveway Gates Opening Arch Curved Picket Steel Gates (Satin Black Powder Coat)

SKU: ARCH1315-1485 x2+POSTS+HINGES

$1,226.00

$1,116.00

Save $110.00

  • Bulky Item Shipping costs are calculated during checkout
  • 1 Year Warranty
  • Brand : Alpha Automation
image
Arch Design
image
3m Opening (2x 1485mm Gates)
image
1300-1500mm Height
  • Arch Design
  • 3m Opening (2x 1485mm Gates)
  • 1300-1500mm Height

In stock

Click & Collect

Delivery

In-Store

Arch Top Driveway Swing Gate with Alternating Pickets

Steel Driveway Gate arch design

The Arch top design gate combines the classic design with a more modern appearance. Each picket in the top rail section of the gate is alternating and still provides excellent security as the gates remining section has pickets throughout. The gate tapers from 1.3m (1300mm) on the low side to 1.5m (1500mm) on the high side allowing for use in most driveway installations

The construction is of pre-galvanized steel SHS tubing (40x40mm all around) and steel pickets (19mm), every join on the gate is welded providing the best strength and rigidity unlike flat pack gates.

Key Features

✓ Proper Rigid Steel Gate, 100% Welded (NO flat pack and NO concerns about flex, integrity or assembly)
✓ Pre-Galvanized Steel Tubing
✓ Satin Black Powder Coating (NIGHT SKY COLOUR)
✓ SHS 40×40 Top, Sides and Lower Rails
✓ 19mm Pickets Welded at 4 TOP Points Per Intersecting Rail
✓ Alternating picket design in top rail for ultra modern appearance

Dimensions

gate measurements arch design

Important Information – Measurement details and Requirements

Width of Gate Panel 1485mm EACH
Height of Gate Panel 1300mm to 1500mm
Combined Width 1485mm+1485mm= 2970mm
Additional Space Requirements 15-20mm for EACH Hinge Side + 15-20mm Between Gates in Centre
Total Space Requirements Including Mandatory Gaps BETWEEN POSTS MEASURMENT MIN. 3015mm to Max. 3030 + POSTS

Gate Hinge Options

Multiple hinge options are available to choose from based on two factors gate weight and adjustability/flexibility.

Post Options

  • 100x100x2000mm, Bolt down with base plate post only used when unable to concrete a post into the ground, if use with cladded gates consider bracing the post
  • 100x100x2660mm, Suitable for applications with heavier gates (eg. cladded with light timber, colorbond etc.) and automatic applications
  • 150x150x2700mm, Suitable for applications with heavier gates (eg. cladded with Hardwoods) and automatic applications
  • 200x200x2700mm, Suitable for applications with heavier gates (eg. cladded with Hardwoods) and automatic applications. Provides the highest end aesthetic look.

Kit Contents (See Description Tab for Full In-Depth Details)

  • Bulky item
    Description

    Arch Top Driveway Swing Gate with Alternating Pickets

    Steel Driveway Gate arch design

    The Arch top design gate combines the classic design with a more modern appearance. Each picket in the top rail section of the gate is alternating and still provides excellent security as the gates remining section has pickets throughout. The gate tapers from 1.3m (1300mm) on the low side to 1.5m (1500mm) on the high side allowing for use in most driveway installations

    The construction is of pre-galvanized steel SHS tubing (40x40mm all around) and steel pickets (19mm), every join on the gate is welded providing the best strength and rigidity unlike flat pack gates.

    Key Features

    ✓ Proper Rigid Steel Gate, 100% Welded (NO flat pack and NO concerns about flex, integrity or assembly) ✓ Pre-Galvanized Steel Tubing ✓ Satin Black Powder Coating (NIGHT SKY COLOUR) ✓ SHS 40x40 Top, Sides and Lower Rails ✓ 19mm Pickets Welded at 4 TOP Points Per Intersecting Rail ✓ Alternating picket design in top rail for ultra modern appearance

    Dimensions

    gate measurements arch design

    Important Information - Measurement details and Requirements

    Width of Gate Panel 1485mm EACH
    Height of Gate Panel 1300mm to 1500mm
    Combined Width 1485mm+1485mm= 2970mm
    Additional Space Requirements 15-20mm for EACH Hinge Side + 15-20mm Between Gates in Centre
    Total Space Requirements Including Mandatory Gaps BETWEEN POSTS MEASURMENT MIN. 3015mm to Max. 3030 + POSTS
    x

    3.0m Opening x 1300-1500mm Arched Double Swing Driveway Steel Gates for 3m Opening (Satin Black Powder Coat)

    Out Of Stock

  • No description available...
    x

    Gate Posts × 2

    Select the post size that best suits your clearance area.

    Show more

    Select the post size that best suits your clearance area.

    ×
    Out Of Stock
    Clear
    Out Of Stock

  • No description available...
    x

    Double Swing Gate Gate Hinge Sets

    Out Of Stock
    Clear
    Out Of Stock

Optional Add On's

  • Description

    40mm Galvanized Driveway Gate Stop

    galvanized swing gate ground floor stop
    • Galvanized Steel Construction
    • Will not damage vehicles (no sharp edges)
    • Will not break like rubber stops
    • Bolt down design
    • Can be driven over
    • Supports installations where the gate is no higher than 25mm from driveway level

    Dimensions

    swing gate metal galvanized gate stop
    x

    Strong Swing Gate Stop Galvanized Steel 40mm

    Out Of Stock

  • Bulky item
    Description

    Powder Coated Gate and Fence Post 75x75mm

    75mm gate fence post powder coat black
    ✓ Pre-Galvanized Steel ✓ Powder Coated Black (Night Sky) ✓ 75x75x2660mm(2.66 Meters)- 2.0mm Wall Thickness
    x

    FENCE POST 75x75x2660 (2.7m) Steel Post Powder Coated Night Sky Satin Black

    Out Of Stock

  • Bulky item
    Description

    Powder Coated Gate and Fence Post 50x50mm

    50mm gate fence post powder coat black
    ✓ Pre-Galvanized Steel ✓ Powder Coated Black (Night Sky) ✓ 50x50x2660mm(2.66 Meters)- 1.5mm Wall Thickness
    x

    Optionally used for Pedestrian Gate 50x50x2660 (2.7m) Steel Post Powder Coated Night Sky Satin Black

    Out Of Stock

  • No description available...
    x

    Lock 35mm Kit (Lock + Handle + Cylinder surrounds)

    Out of stock

    Out Of Stock

  • No description available...
    x

    Pedestrian Gate Hinge (Choose a side)

    Out Of Stock

  • Bulky item
    Description

    Driveway Pedestrian Gate with Alternating Pickets

    Steel Driveway Gate top alternating design

    The Alternating top design gate combines the classic design with a more modern appearance. Each picket in the top rail section of the gate is alternating and still provides excellent security as the gates remining section has pickets throughout. The gate height is 1.5m (1500mm) allowing for use in most driveway installations

    The construction is of pre-galvanized steel RHS tubing for the Bottom Rail (80x40mm), SHS tubing (40x40mm Top, Sides and Horizontal Rails) and steel pickets (19mm), every join on the gate is welded providing the best strength and rigidity unlike flat pack gates.

    Key Features

    ✓ Proper Rigid Steel Gate, 100% Welded (NO flat pack and NO concerns about flex, integrity or assembly) ✓ Pre-Galvanized Steel Tubing ✓ Satin Black Powder Coating (NIGHT SKY COLOUR) ✓ RHS 80x40 Bottom Rails ✓ SHS 40x40 Top, Sides and Additional Rails ✓ 19mm Pickets Welded at 4 TOP Points Per Intersecting Rail ✓ Alternating picket design in top rail for ultra modern appearance

    Dimensions

    gate measurements flat top alt design

    Important Information - Measurement details and Requirements

    Width of Gate Panel 880mm EACH
    Height of Gate Panel 1500mm
    Additional Space Requirements 15-20mm for EACH Hinge Side + 15-20mm Between Gates in Centre (Double Gates)/End of gate (Single Gate)
    x

    880mm x 1500mm Alternating Picket Steel Pedestrian Gate (Satin Black Powder Coat)

    Out Of Stock

  • No description available...
    x

    Fence Panel Screw On Socket Kit Tops and Bottom (Both Sides)-PER PANEL

    Out Of Stock

  • Bulky item
    Description

    Fence Panel with Alternating Pickets

    Fence Panel With flat top design

    The Alternating top design fence panel combines the classic design with a more modern appearance. Each picket in the top rail section of the fence panel is alternating and still provides excellent security as the fence panel remining section has pickets throughout. The panel height is 1.5m (1500mm) allowing for use in most driveway installations

    The construction is of pre-galvanized steel RHS tubing for the Bottom Rail (80x40mm), SHS tubing (40x40mm Top, Sides and Horizontal Rails) and steel pickets (19mm), every join on the fence panel is welded providing the best strength and rigidity unlike flat pack fence panels.

    Key Features

    ✓ Proper Rigid Steel fence panel, 100% Welded (NO flat pack and NO concerns about flex, integrity or assembly) ✓ Pre-Galvanized Steel Tubing ✓ Satin Black Powder Coating (NIGHT SKY COLOUR) ✓ SHS 40x40 Top Rails x2 and Bottom ✓ 19mm Pickets Welded at 4 TOP Points Per Intersecting Rail ✓ Alternating picket design in top rail for ultra modern appearance

    Dimensions

    fence panel Measurement Steel Driveway fence panel flat top design

    Important Information - Measurement details and Requirements

    Width of fence panel Panel 2400mm EACH
    Height of fence Panel 1500mm
    Max. Post Span 2400mm
    Min. Post Span Any, Cut to size
    x

    **PICKUP ONLY** 2400mm x 1500mm Alternating Picket FENCE PANEL- Cut to width during install (Satin Black Powder Coat)

    Out of stock

    Out Of Stock
3000mm 3.0×1.3-1.5m Double Swing Driveway Gates Opening Arch Curved Picket Steel Gates (Satin Black Powder Coat)

$1,226.00

$1,116.00

Save $110.00

x

Register

Shipping To

Add company name

Australia

Add apartment, unit, building, floor, etc.

Billing To

Add company name

Australia

Add apartment, unit, building, floor, etc.


Close