System Powering Options

By default in this package the system will be supplied as a powered system, (power point available at the gate)(optional uninterrupted battery back up available), optionally if required there are upgrade options available to switch to an external power supply with a lov voltage run available up to 120 meters, or a totally standalone solar system with a 60 Watt panel and 15aH Deep Cycle Batteries.

Power at the gate (Default Option)

electric automatic swing gate

External Low Voltage Power Supply

24v automatic swing gate

Off Grid Standalone Solar 60 Watts 15aH Deep Cycle

solar off grid automatic swing gate

Premier SW24 Advanced Digital Automatic Gate Controller

Automatic electric 24v driveway gate control box

The Premier SW24 Automatic gate system controller comes standard with a state of the art feature set catering for all types of installations, whether only requiring ordinary residential operation to all the way up to a full fledged setup requiring advanced logic principals taking advantage of the 70% duty cycle.

The on-board display makes easy work of any settings changes if desired and is easily visible in the outdoors being the advantage of LED displays. With multiple Inputs and outputs just about any accessory is compatible with the Premier SW24 system (see the complete list below).

Also boasting multiple safety inputs along with its precise on-board detection it allows safety to remain prioritized for any application. with the optional plug and play battery back-up system you will be sure not to ever be locked out of your property.

The installation process is always kept in mind allowing up to 7 cable inputs into the outdoor weatherproof gate control box using IP68 cable glands, you will never run out of space or provisions for more.

The genius automatic learning system, hold one key to enable and begin the automatic learning of the gate system and automatic definition of the ramp up and slow down points, its as easy as it gets suiting all skill levels from DIY once off installs to professional installers.

Ready to plug into an ordinary power point there is NO high voltage wiring required, All connections are Low Voltage and safe for all installers regardless of the skill level without the concern of electrical shock.

Automatic Gate System Features

Features as Standard

Easy to use Single Button Mode of Opening-Stop-Closing including the “Stay open” feature
Automatic Closing Timer Adjustable in one second increments up to 5 minutes
Automatic learning of the gate + Fine tunable operating Times
Soft Start (Ramp UP) and Soft Stop/Slowdown (Ramp DOWN)
Adjustable Slow Down Speed and Time
Optional Plug and Play Battery Backup System
Fortress Series Electric and Magnetic Lock Support
Low Voltage Power for all accessories directly through the gate controller
Warning Light Output

Normal Modes allow for the “STAY Open” feature to cancel the automatic closing timer by remote Handy when expecting guest, backing in a trailer etc.


Multiple Configurable Safety Inputs

Obstacle Detection by load This feature is always running and detecting if the gate is stalled under load by an obstacle during its travel.
Typical Photocell Input Terminal to prevent gate from closing on vehicle, reverts gate if a vehicle passes through during closing, restarts the Automatic closing timer after each interruption.
Photostop Input, Same as the typical photocell input with an added feature of preventing the gate from opening if the photocell is blocked. Handy for short driveways and also opening outwards installations.
Special Detector Input to tell the gate to close two seconds after the vehicle passes, perfect for higher security applications (and also escaping dogs).
Safety Edge Input Installed on to the gate, safety edges allow for a return to open if the edge of gate is to touch an obstacle.
Emergency Stop Button This feature allows for a manned button to immediately stop the system open pressing.

Wired and Wireless Access Control Support

Keypads Wired or Wireless Secure PIN Number access (Tekno K1/Dex4)
Press Button Simple button operation
Mobile APP Control Cloud based and operatable anywhere in the world (Tekno WF)
Doorbell Intercom Systems
Exit Wands and Induction Loops To automatically operate the gate upon vehicle presence
GSM 4G Technology Operate the gate by phone call (or intercom phone call) (Tekno 4/Tekno S1)
Weekly Schedule Timer To automatically operate the gate based on a programmed daily/weekly operating times

Residential, Commercial and Complex Working Modes Options

Normal Remote Operation (Open-Stop-Close)
Normal Remote Operation (Open-Stop-Close) with Automatic Closing Timer and “Stay Open” feature (299 Seconds/5 Minutes)
Typical Complex – Individual Open and Close Command Inputs
Typical Complex – Individual Open and Close Command Inputs with Automatic Closing Timer “Stay Open” feature by wired input (299 Seconds/5 Minutes)
Secure Complex – Open Only Command Inputs with Automatic Closing Timer (299 Seconds/5 Minutes) “Stay Open” feature by wired input

Automatic Gate System Controller Specifications

Operating Voltage 24V
Duty Cycle 70%
Standby Consumption 20mA
Supports Battery Backup Yes, 24V DC
Automatic Gate Lock Support Yes, 24V DC
Light Support Yes, 24V DC
Accessories Voltage Yes, 12V DC
Safety Inputs Photocells, Safety edges, Induction Loops, Edge Sensors, Emergency Stop Button
Operating Temperature -10°-60°C
Maximum Remotes 192

Control Box Dimensions

Automatic Driveway Gate System Control Box