This Premium Quality product is Made in Italy and is provided with a TWO year Warranty
24V Digital Display Powered Swing Gate Control Panel (Internal Transformer)
$380.00
- Freight from $25.00 Calculate Freight
- 2 Year Warranty
- Brand : CAME
- Made In Italy
- ZL65
Special Order- 48HR Dispatch*
Please note this is a replacement operator and is not supplied with remotes or receiver card.
Digital Control Board
By default the control board will be pre-configured for the best typical settings for most users however with the onboard digital display and easy to use scroll buttons the configuration options are almost endless. Out of the box it will be configured for Both Gates OPEN/CLOSE + Pedestrian Function (one gate full open) in a home you would just enable and set the automatic close timer (if required) and that’s it. However in an installation with a longer driveway you may want to adjust the pedestrian command to be an OPEN ONLY input allowing for the use of a loop detector to be used to detect vehicles approaching the gate and open automatically (and optionally close on the automatic close timer if enabled)
Power Inputs and Outputs
Typical input and outputs to power the system and any wired in accessories
24V Power Input24V Power Output For AccessoriesConfigurable Methods Of Operation
Wireless and Wired equipment can be configured in a number of different ways to support the best suited operation for the site, by default the system is configured for typical usage being full gate operation and pedestrian opening
Full Gate OperationPartial (Opens one gate partially) OR Pedestrian (Opens ONE gate completely)Open OnlyClose OnlyRemote Operation
The remote buttons can individually be programmed to work in any of the below settings for each button.
OPEN-CLOSE (Reverting action if pressed part way through a cycle)OPEN-CLOSE (Sequential action if pressed part way through a cycle it will STOP)Partial-Pedestrian OperationMotor Specifics
Default configurations are already set however, if required further adjustment can be made to suit all installations
ENCODER ControlAutomatic Calibration (with Adjustable Calibration Speed)Motor Test (used for checking your directions prior to calibration)Adjustable ThrustAdjustable Travel SpeedAdjustable SensitivityAdjustable Slowdown SpeedAdjustable Slowdown Position (Two Stages)Delay Time Between Motors for OpeningDelay Time Between Motors for ClosingLight Control
Multiple options for visible safety alerts, illuminating the driveway OR Both
Flashing/Static Illuminated Light from OPEN til CLOSEDAdditional Output for Flashing During OpeningAdded Security
Added protection for the gates and gate system if wind is a factor or in a high risk setting
Automatic Electric Lock (Adjustable Time) with Reverse Thrust Feature
Safety Devices
Plenty of support to protect occupants, visitors and there vehicles with TWO Saferty Inputs completely configurable in there functionality and method of operation with FOUR diffrent logic settings available.
Supports Photocell SensorsSupports Reflective SensorsSupports Safety EdgeSupports Induction Loops for SafetySupports STOP ButtonSupports Maintained Action (Hold to OPEN/CLOSE)Operational Control
Infinite support for accessories and methods of operation
Remotes ControlsWireless KeypadsWired KeypadsWired ButtonInduction LoopsIntercom Systems