(4.8m – 5.2m) Complete Residential Sliding Gate Hardware Package Kit suitable for Steel, Aluminum and Horizontally Cladded Gates (4.8m, 4.9m, 5m, 5.1m, 5.2m meter gates)

Name: (4.8m - 5.2m) Complete Residential Sliding Gate Hardware Package Kit suitable for Steel, Aluminum and Horizontally Cladded Gates (4.8m, 4.9m, 5m, 5.1m, 5.2m meter gates)
SKU: SGHK-RES-50-STD
Price: 209 AUD
Availability: InStock

SKU: SGHK-RES-50-STD

$234.00

$209.00

Save $25.00

Freight from $36.00 Calculate Freight
1 Year Warranty
Brand : Alpha Automation

In stock

Click & Collect

Delivery

In-Store

Top Guide System Options

Multiple options available to choose from based on the gates total thickness including any horizontally cladding material if applicable.

100mm Black rollers with 175mm Bracket
The 175mm overhead bracket allows for an adjustment up to maximum total gate thickness of 75mm. This is the standard option typically used with 40/50mm thick gates without external cladding and allows for minor adjustment.

100mm White rollers with 175mm Bracket
The 175mm overhead bracket allows for an adjustment up to maximum total gate thickness of 75mm. This is the standard option typically used with 40/50mm thick gates without external cladding and allows for minor adjustment.

100mm Black rollers with 210mm HD Bracket
The 210mm Longer overhead bracket is typically the go to in most cases when flexibility and best adjustment is key. Allowing for a large adjustment area up to maximum total gate thickness of 115mm. Using an overhead bracket and roller arrangement as it allows for all standard gate thickness and also surface mounted horizontally clad gates or gates that need a larger set back away from the post. It is constructed of DUAL C channels providing the best rigidity and with no flex under load.

Independent roller system (White)
Typically (but not exclusively) used with spear design gates, a guide roller on each side (inside support post also required) WITHOUT the need of an overhead bracket allows for any protrusion above the gate frame to run through without an issue as the rollers contact each side of the gate frame, it does however require the gate to operate on a level grade, if not see the C channel section option with Nylon Block.

Independent roller system (Black)
Typically (but not exclusively) used with spear design gates, a guide roller on each side (inside support post also required) WITHOUT the need of an overhead bracket allows for any protrusion above the gate frame to run through without an issue as the rollers contact each side of the gate frame, it does however require the gate to operate on a level grade, if not see the C channel section option with Nylon Block.

Gate Catcher/Receiver Meeting Point

Multiple options available to choose from based on the gates total thickness including and cladding material if applicable. It is recommended to use a gate catcher that is 10mm greater than the gate thickness. All catchers are available with offset brackets allowing for closing behind a post (as opposed to up to a post).

Available in 50mm and 75mm entry points.Best suited for gates that close up to a post.

sliding-gate-catcher-reciever-with-top-cap

Available in 60mm and 80mm (Anti Lift).Best suited for gates that close up to a post.

Sliding-gate-adjustable-catcher-with-roller-anti-scratch-

Adjustable from 55mm-90mm.Best suited for gates that close up to a post.

Including the Offset bracket to help align to a gate sliding behind a post- available in 50mm and 75mm entry

Including the Offset bracket to help align to a gate sliding behind a post- available in 60mm and 80mm entry (Anti Lift)

Sliding-gate-adjustable-catcher-with-roller-anti-scratch-OFFSET-Bracket

Including the HAEVY DUTY Offset bracket to help align to a gate sliding behind a post- Adjustable from 55mm to 90mm

Sliding Gate Wheel Options

Internal Recess/Flush Mount Wheels

Internal Double bearing wheels allow the gate wheels to be recessed into the bottom of the gate frame (minimum height 75mm tubing), they keep the gate close to the ground track system (normally within 25mm) and provide the neatest aesthetic. The small pocket cut into the bottom of the gate is not greater than the 78mm wheel diameter and allows the flange points to meet with the tubing on either side and screw into place.

External Surface Mount Wheels

The easiest to install, these bearing wheels screw directly to the bottom of the gate tubing without any need for cutting, the external surface mounting wheels typically raise the gate 90mm from the ground track system.

Sliding Gate Ground/Floor Track

The sliding gate ground track is formed from galvanized steel to the R10 profile, this profile is proven to be the smoothest operation for the gate wheels without any negative characteristics like the older v groove designs.

The track is secured to the driveway using plugs and screws or knock in’s such as anchor nails, its important to use a fixing that does not protrude greater than 3-4mm to prevent contact with the gate wheels.

✓ Galvanized Steel
✓ Elongated 6mm holes allow for adjustment before final tie down
✓ Suits all R10 gate wheels

Gate Stopper

The gate stopper is a crucial part to any sliding gate installation, the stop is installed at the end of the open position to prevent the gate from being opened past the normal open point which prevents the sliding gate from coming off the track (or out of the top guiding system.

✓ Rubber Bumper
✓ 115mm High
✓ 8mm stem and 4mm base steel thickness

Kit Contents (See Description Tab for Full In-Depth Details)

No description available...

x

R10 Gal Steel Sliding Gate Track (QTY is Total Meters) × 10

Galvanized Steel Construction, nailed/anchored down to the concrete for the gate wheels to roll on

Show more

Galvanized Steel Construction, nailed/anchored down to the concrete for the gate wheels to roll on

×

Out Of Stock

Gate Catcher

Out Of Stock

Gate Catcher Options *

Clear

Out Of Stock

Upper Roller Guide System

Out Of Stock

Upper Roller Guide Options *

Clear

Out Of Stock

Sliding Gate Wheels

Out Of Stock

Sliding Gate Wheel Options *

Clear

Out Of Stock

Description

120mm Height Sliding Gate Stop

The gate stopper is a crucial part to any sliding gate installation, the stop is installed at the end of the open position to prevent the gate from being opened past the normal open point which prevents the sliding gate from coming off the track (or out of the top guiding system.
✓ Rubber Bumper ✓ 120mm High ✓ 8mm stem and 4mm base steel thickness

Dimensions

x

120mm Height Sliding Gate Stopper Steel Bolt Down

Out Of Stock

Optional Add On's

Description

Pack of 100x 6mm X 38mm Hammer Drive Masonry Anchor Ideal use for tying down sliding gate track. Easy installation: Drill a 6mm Hole into the concrete then hammer down the nail to expand the sleeve

x

6mm X 38mm Hammer Drive Masonry Anchor Knock Ins (100 Pack)

Add for

$25.00

Out Of Stock

6mm X 38mm Hammer Drive Masonry Anchor Knock Ins (100 Pack) quantity
Description

Pack of 50x 4mm x 19mm Self drilling wafer head screws Ideal for installation of Z profile. Easy installation: Using a Philips head drill bit, directly screw without the need to pre-drill

x

4mm x 19mm Self Drilling Wafer Head Phillips Screws Zinc (50 Pack)

Add for

$10.00

Out Of Stock

4mm x 19mm Self Drilling Wafer Head Phillips Screws Zinc (50 Pack) quantity
Description

Pack of 50x 6mm x 25mm Self drilling metal tek screws Ideal for installation of gate wheels, brackets, etc. Easy installation: Using a 3/8" nut setter directly screw without the need to pre-drill

x

6mm x 25mm Self Drilling Metal Tek Screws Zinc (50 Pack)

Add for

$12.00

Out Of Stock

6mm x 25mm Self Drilling Metal Tek Screws Zinc (50 Pack) quantity
Description

Pack of 50x 8mm x 40mm Self drilling metal tek screws Ideal for installation of offset gate catcher, swing gate operators, etc. Easy installation: Using a 12mm socket and adapter directly screw without the need to pre-drill

x

8mm x 40mm Self Drilling SUPER Metal Tek Screws Yellow Zinc (50 Pack)

Add for

$25.00

Out Of Stock

8mm x 40mm Self Drilling SUPER Metal Tek Screws Yellow Zinc (50 Pack) quantity

Manuals

Alpha-Automation-Sliding-Gate-Installation-Helpful-Guide V2

(4.8m – 5.2m) Complete Residential Sliding Gate Hardware Package Kit suitable for Steel, Aluminum and Horizontally Cladded Gates (4.8m, 4.9m, 5m, 5.1m, 5.2m meter gates)

$234.00

$209.00

Save $25.00

(03) 9123 1226

(03) 9123 1226

Specialty Equipment

Commercial Gate Automation

(4.8m – 5.2m) Complete Residential Sliding Gate Hardware Package Kit suitable for Steel, Aluminum and Horizontally Cladded Gates (4.8m, 4.9m, 5m, 5.1m, 5.2m meter gates)

Top Guide System Options

Gate Catcher/Receiver Meeting Point

Sliding Gate Wheel Options

Internal Recess/Flush Mount Wheels

External Surface Mount Wheels

Sliding Gate Ground/Floor Track

Gate Stopper