Custom Horizontal Slat Swing Gate (65×16 Slats in F Channel) 100×50 Bottom and 50×50 Top and Sides

ATTENTION: This option is available only for Melbourne based customers for pickup from Dandenong South or Delivery within 50KM’s AFTER COMPLETION (additional transport charges apply) .

If one of our ready made gates cannot suit your requirement then our cost effective custom gates allow for full flexibility to suit just about any installation.

For custom fabrications all gates are constructed to above standard with 50x50mm Top, Sides and All internal Bracing and a 100x50mm bottom Rail, Then coated with your desired powder coat colour (Dulux powder coat).

Horizontal Slats are Pre-installed prior to powdercoating into the F Channel Which is screwed into each side of the inner vertical rails of the welded gate frame. Each individual slat is screwed into the F channel then the gate is powdercoated ensuring all slats and screws are powdercoated to the same colour.

Powder Coating is standard just select the colour, we offer the option of near to every popular colorbond colour, if its not in the list just reach out and let us know.

Take your pick in our best in class and over spec. Titan operators. Available in Electric, Low Voltage and Solar Powered, theres always a top end option to suit, Dont forget to fine tune your Orion LS kit in its Kit Contents Tab.

Below is an example of the technical drawing you will be provided for approval after ordering.