Dingo Slimline 24V Automatic Driveway Electric Gate Linear Actuator with 7 Metre
$260.00
- Freight from $30.90 Calculate Freight
- 1 Year Warranty
- Brand : Automation Systems Australia
Same Day Dispatch (Order before 10AM)
In stock
Dingo Low Voltage 24 Volt Compact Driveway Gate Motor
The Dingo Actuator kit is a compact and slimline gate actuator at only 75mm in width it can fit in the narrowest of installations. Constructed from an extruded aluminum housing it retains light weight characteristics, a bright appearance yet still carries the rugged internals that we set as the standard.
Operations are smooth and efficient using its 24 Volt DC motor system coupled to a 19mm (3/4″) lead screw and a brass driven nut attached to stainless steel piston. The end positions are set using a magnetic reed limit switch for both the open and closed positions.
The laser cut steel brackets for the gate and post cater for all installations allowing for up to 16 different mounting configurations to achieve the desired pivot geometry for either pulling inwards to open and also pushing outwards to open installations. The post bracket assembly consists to three parts, the top and bottom plates are 4mm thick each whilst the curved tongue is 8mm thick. The total thickness of the post bracket assembly when assembled is an outstanding 16mm.
The Dingo has a 400mm stroke and the ability to work with gates from as short as 800mm and as wide as 3m (10ft) with a maximum weight of 175kg, if a wider or heavier gate is installed please see the Commando series of operators.
Key Features
✓ Aluminum Housing
✓ Slimline and Compact design
✓ 19mm (3/4″) Actuator Lead Screw
✓ Open and Closed Position ADJUSTABLE magnetic reed switches with In-Built controller-Only Two Wires Back to Gate Control Box
✓ Flexible and vast installation geometries
✓ 1.5mm Double Insulated PVC Cable
A peak inside the Dingo Series
Piston Overview
Adjustable Limit Switches
Telescopic Actuator In Action
The ULTIMATE bracket (16 Flexible Installation Options)
Driveway Gate Motor Specifications
| Operating Voltage | 24V DC |
| Duty Cycle | 60% |
| Thrust | 800N |
| Maximum Stroke Length | 360mm |
| Limit Switches | Yes, Open and Closed Positions DC |
| Gearing Structure | Planetary Gearbox |
| Case Material | Extruded Aluminum |
| Piston | CNC Alloy Gate End-Stainless Steel Piston-Brass Nut |
| Maximum Gate Weight | 3 Meters (10 Ft) |
| Maximum Gate Weight | 175KG |
“Pull to Open” Opening Inwards Geometry
“Push to Open” Opening Outwards Geometry
